My calculations for impact of the falling floor on the one below does involved shear of the girder seat where it connects to the column. I have shown them publicly on the 911 free forum and Metabunk.org. Nobody was able to refute them after I showed the falling floor would not be able to apply enough load to shear the girder seat.
Can we see your calculations?
Did you use the Maxwell equations I saw no evidence that you did?
Yes as soon as I can transcribe them into a post able form, using the data you provided and the maxwell equations, I wrote a simple calculating program, simplified the problem to the girder floor, connection and girder on the floor impacted by varing location of impact by just one foot the strength decreased by a factor of ten.
How the girder impacts the floor below determined the energy it exerted on the connection, that is basic engineering Tony.
David B. Benson used the Maxwell equations in the computer program for the Paper he wrote with Greening, that allowed progression though the cold structure faster Though Floor stripping do to beam and girder failures.
The Floor below the girder actually fractures easier when cold, as that is when the welds and bolts are most venerable to sheer, heating the connection actually allows it more ductile deformation before sheer of bolts and welds fail.
In other words heating produces a condition of Ductile failure that negates the potential of shear lag fracture.
Instead your talking of inducing ductile tearout, not Fracture at 872 C Ductile tear out will occur no matter how the Lower floor is impacted.
At that temperature, the steel has lost almost 3/4 of it's strength.
So the floor below the impacted floor, has to be cold, or cooled below 300C for Fracture to occur.
"History
One of the founders of the mathematical theory of structural rigidity was the great physicist James Clerk Maxwell. The late twentieth century saw an efflorescence of the mathematical theory of rigidity, which continues in the twenty-first century.
"[A] theory of the equilibrium and deflections of frameworks subjected to the action of forces ... in cases in which the framework ... is strengthened by additional connecting pieces ... in cases of three dimensions, by the regular method of equations of forces, every point would have three equations to determine its equilibrium, so as to give 3s equations between e unknown quantities, if s be the number of points and e the number of connexions[sic]. There are, however, six equations of equilibrium of the system which must be fulfilled necessarily by the forces, on account of the equality of action and reaction in each piece. Hence if e== 3s-6, the effect of any eternal force will be definite in producing tensions or pressures in the different pieces; but if e>3s-6, these forces will be indeterminate...."[Maxwell 1864]"
The equation I used was Maxwell's equation for a pinned beam.